Hyundai Translead is the only manufacturer to offer hot-dipped galvanizing of the complete chassis frame and components as an enhanced option to further protect against corrosion.


Lightweight durable construction with tare weight 5,450 lbs


Extra cargo capacity


Ease of access & repair of 7-way harness and gladhands


■ High-strength alloy steel construction for extra strength and durability

■ 22.5” radial tires with lightweight aluminum wheels

■ LED lights

■ All steel parts are shot-blasted and coated with zinc epoxy primer, before fabrication and after welding

■ Ease of access & repair of 7-way harness and gladhands

■ Sealed wiring harness with integral ground

■ Complies with AAR & NHTSA regulations and TTMA recommendations

■ 4-3/4” Gooseneck height


Overall Length 40’ 8-1/2”

King Pin Setting 30”

Capacity 65,000 lbs

Tare Weight 5,450 lbs

GVWR 70,400 lbs

Main Beam High tensile steel, hot rolled 12” x 16 lbs/ft H-beam

Gooseneck Fabricated “I” Beam with 5/16” top & bottom flanges and 1/4” web, all GR80

CrossmembersFabricated channel with gussets integrated

Upper Coupler All high tensile steel construction with AAR Certified cruciform style king pin. All interior walls of closed sections coated for superior corrosion protection

Front Bolster 8”W x 10”H “U” channel 3/16” thick GR80 with two locking pins

Rear Bolste8”W x 7-7/8”H “U” channel GR80 with two non-retractable twist locks

Landing Gear50,000 lbs capacity with heavy-duty low profile sand shoe (solid pin)

Rear Impact Guard4” horizontal step “U” channel designed and tested to conform to Federal Motor Vehicle Safety Standards (FMVSS)

SuspensionSAF Holland overslung spring hangers with two leaf springs

Wheel & DrumsHeavy duty, 16-1/2” x 7” outboard mounted brake drums with 8-1/4” x 22-1/2” hub piloted aluminum disc wheels

Tires255/70R22.5 16 PLY (H)

Axles5” round, 22,500 lbs rating, 71 -1/2” track, 16-1/2” x 7” with non-asbestos brake lining

Brakes2S-1M ABS brake system. Complies with FMVSS 121

Lights & Wiring12 volt sealed system with molded connectors to fit sealed LED lamps

PaintAll steel parts shot-blasted, coated with a zinc epoxy primer and finished with urethane topcoat

MarkingsCustomer and conspicuity markings installed per latest Federal Safety Standards


40’ Lightweight Gooseneck